Connecting The Machine; Connecting The Machine To The Host Using The Parallel Cable - Ricoh Aficio 650 Operating Instructions Manual

Connecting the Machine

Make sure the shape and the position of the connector are as shown in the illus-
tration.
2
1.
10BaseT / 100BaseTX
2.
Parallel Port

Connecting the Machine to the Host Using the Parallel Cable

Connect the machine to the host computer using a parallel cable compliant with
IEEE 1284 (supplied by you).
Follow these steps to connect the machine to your host computer:
A
Make sure you have the correct cable.
B
Make sure both the machine and the host computer are turned off.
C
Plug the 36-pin end of the parallel cable into the parallel port at the back on
the right side cover of the machine.
D
Squeeze the wire clips on each side of the connector together until they
snap into place. The clips hold the cable securely in place.
E
Plug the other end of the parallel cable into the computer's parallel port.
1
Connecting the Machine
TSPP710N
1
5