Table of Contents
Advertisement
How To Make Copies
Automatic/Manual density adjustment choice
You can specify the copy density adjustment from Automatic Density adjustment or
Manual Density adjustment by press the Auto/Photo key.
The settings of Auto/Manual density adjustment:
Useful Tips:
v The Auto/Photo Mode is designed to provide optimal density ratios for
most applications, however, lighter and darker setting adjustments are
possible.
v The Auto/Photo Mode is a default setting for the Initial state. The
Manual Text/Photo Mode can be specified through the Utility key.
íP 6-20
Manual density adjustment
You can adjust the copy density from 9 levels.
1. Press the Auto/Photo key to select the desired mode. There are three modes you can
select, the selected copy mode will appear on the message display as shown.
Auto/
Photo
2. Press the
or
TEXT mode with manual density and PHOTO mode.
For example: To adjust the density to a lighter level, press the . key.
Density adjustment
TEXT mode
with Auto density
PHOTO mode
with Manual density
TEXT mode
with Manual density
key to adjust the desired level, This selection is available for
Auto/
Photo
The indicator moves
to a lighter level.
Display indication
Copy mode
TEXT
TEXT
6-15
1.23
1
1.23
1
Advertisement
Table of Contents
