Using The Manual Paper Feeder - Konica Minolta FAX 9820 User Manual

HOME
Your Konica FAX 9820's manual paper feeder allows
you to make copies on a different type of paper than
what you normally keep in the paper tray. To make
copies using the manual paper feeder, follow the
instructions below.
Note: The paper you use in the manual feeder must be
the same size as the paper in the paper tray—if it isn't, the
paper will jam.
If you do want to put a different size paper in the manual
feeder, change the 1ST PAPER SIZE function setting to
the size you want to use—see page 58 for details. When
you are finished, be sure to reset 1ST PAPER SIZE to
match the paper in the tray.
1 Load your documents face down in the document
feeder.
2 Press in on the lower half of your fax machine's front
panel indents, just above the paper tray.
3 Pull the manual paper feeder down until it is horizon-
tal.
4 Adjust the paper guides on the feeder.