Table of Contents
Advertisement
Troubleshooting
Symptom
The copy appears blurred.
The copy has unintended
specks or spots.
Unintended markings
appears along the edge of
the copy.
Possible cause
A darker density level for
the Manual Density Mode
has been specified.
The surface of the original
glass is dirty.
The original document is
not securely placed upon
the original glass.
The paper is damp.
The surface of the original
glass is dirty.
The original pad is dirty.
The original document is
a second-generation copy
or an OHP transparency
(or other translucent
media), etc.
Image from the backside
of a double-sided
document may be
reproduced when the front
side is copied.
The original pad is dirty.
The selected paper size is
larger than the original
document.
The original document is
not placed in the proper
orientation on the original
glass.
The zoom ratio setting
does not match the size of
the original document.
9-4
What to do
§ Adjust the density level
to darker, using the
density adjustment keys.
Auto/
Photo
§ Wipe the original glass
clean with a soft cloth.
§ Place the original
document securely on
the original glass.
§ Replace the paper.
§ Wipe the original glass
clean with a soft cloth .
§ Wipe the original pad
clean with a soft cloth.
§ Set a blank sheet of
paper over the original
document.
§ Lower the density level
,using the density
adjustment keys.
Auto/
Photo
§ Wipe the original pad
clean with a soft cloth.
§ Specify a paper size that
is appropriate to the
original document.
§ Place the original
document correctly on
the original glass.
§ Select a suitable zoom
ratio setting.
Advertisement
Table of Contents
