Konica Minolta FK-116 User Manual page 151

How To Make Copies
Using the Manual Bypass Tray
Use this tray to copy documents onto paper that is not otherwise loaded into the
machine or to copy onto OHP transparencies or special paper types.
• Types of Paper
Paper and media supported by the Manual Bypass Tray
Regular paper (60-90 g/m
Thick paper (90-163 g/m
OHP transparencies and post cards
• Paper Size
Maximum: 216mm * 356mm
Minimum: 86 mm * 148mm
How to operate
1). Loading the paper of standard size (A4/Letter)
When setting documents of plain or thick paper types.
1. Set the original document, using the ADF or Plate scanning.
Example: ADF
2. Adjust the Document Guide Plates to the
original document. Insert the record paper face
up into the tray until it stops.
NOTE:
• Be sure to feed the paper one sheet at a time.
• Curl the edges of the paper upwards before setting the paper into
the machine.
2
)
2
)
6-6