Basic Faxing; To Fax Using The Automatic Document Feeder - Konica Minolta FX-3 User Manual

3
3.3

Basic Faxing

To fax using the Automatic Document Feeder

1
Press the [Fax] key.
The machine enters Fax mode, and
the fax screen appears.
2
Load the document to be faxed into
the Automatic Document Feeder.
H
Adjust the Document Guide
Plates to fit the size of the
document.
H Load the document face up.
Tip
If a double-sided document is loaded into the Duplexing Document
Feeder (Option for the Di2011 only), press the [Original] key until
the "Duplex Orig." function is selected.
3
If necessary, change the "Resolution" setting (p. 3-13).
4
Using the 10-Key Pad, enter the fax
number of the recipient.
H The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing"
on page 3-1.
5
Press the [Start] key to begin scanning and sending the fax.
H
To stop the transmission, press the [Stop] key, and then press the
[Yes] key in the next screen that appears.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 6-56).
3-14
Faxing
Fax Kit (FX-3)