Table of Contents
Advertisement
Basic FAX Operations
4. Check that the setting has been made correctly, then press
the Yes key.
5. This completes the setting for "CLOSED
NETWORK RX".
Press the Panel Reset key to restore
the initial screen.
Setting FOOTER
Overview of the Footer function
The footer prints the date, time, reception control number and page NO. of the received
document at the bottom of the printed page.
By printing an Activity Report using the session number you can identify the origin of
the document, when it came in, and how many pages it contained. The footer appears at
the bottom of each page in a document. Meaning of each item:
1. Date of Reception
2. Time of Reception
3. The fax number of the transmitter
4. Session number
5. Page number
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
MAY.29'2000 07:57
NOTE:
The footer is printed on the area 4mm from the trailing edge of the paper.
Any data on this area of the document will be covered.
How to set up the Footer
1. Press the Utility key 5 times.
The display changes to the "RX
OPERATION".
RECEIVED FROM: 1234567890
1
2
2-35
Yes
RX OPERATION ?
OK=YES / or 1-8
Panel Reset
#0020-009
3
4
Utility
RX OPERATION ?
OK=YES / or 1-8
5
x 5
Advertisement
Table of Contents
