●
Display and User Input Sections
(1) Front view
Front USB2.0 port
Front USB3.0 port
(*1) Press the reset switch by inserting an eject pin. If an eject pin is not available, use a pin that
fits the hole of the reset switch instead.
325mm
Figure 1-1 Name of Each Part (Front View)
356mm
Status display digital LEDs
HDD1 Status lamp
HDD2 Status lamp
Drive access lamp /
Standby lamp (STBY)
Alarm lamp
Status lamp (STATUS)
Power switch
Reset switch(*1)
1-5
1. GETTING STARTED
The dimensions do not
include rubber feet.
93mm