Hitachi HF-W2000 Instruction Manual page 122

3. SETUP
3.2.3.2 Installing Windows XP Mode
Follow the procedure below to install Windows XP Mode:
1. If you are not logged on to the computer as an administrator account, log on to the
computer as an administrator account.
2. Start the command prompt to start an installation program.
・Click Start and point to All Programs.
・Click Accessories.
・Right-click Command Prompt to show a menu. On the menu, click Run as
administrator.
(If the administrator account you used for log on is a built-in administrator account,
simply click Command Prompt.)
・If you see the User Account Control window, click Yes.
3. At the command prompt, type the following and press Enter.
cd C:¥HITACHI¥XP_Mode
4. And then type the following and press Enter. Installation starts.
WXPMode_install.bat
5. When the installation finishes, the following message is displayed to indicate the
installation is complete.
Installation completed.
This completes the installation procedure. Close the command prompt.
3-20