Table 8-5 Error Messages Of The Mdump Command - Hitachi HF-W2000 Instruction Manual

8. MAINTENANCE OPERATIONS
<Diagnosis>
When this command is terminated with an error, the following error messages is
displayed.
You do not have the privilege to run this command.
Please run this command again on "Administrator:
Command Prompt".
< NOTE >
・When you run the mdump command, log on to the computer by using an
administrator account registered on the computer (as a member of the
Administrators group). You cannot run multiple instances of the mdump
command simultaneously.
・Start the command prompt with administrator privileges and run the command.
・If there is not enough free space on the copy destination, the Compressed
Folders Error occurs when you run the mdump command. Make sure that there
is a free space that is comparable to the capacity of the physical memory before
running the mdump command.
・Do not run the mdump command immediately after the OS start after the blue
screen is displayed. If you do, the Compressed Folders Error occurs. For details,
refer to "HF-W2000 Model 48/45 RAS FEATURES MANUAL".

Table 8-5 Error Messages of the mdump Command

Message
You do not have administrator
privileges.
Log on to the computer by using an
administrator account and run the
command again. If User Account
Control (UAC) is enabled, start the
command prompt with administrator
privileges and run the command.
8-16
Description