External Interface Cable Length Specifications - Hitachi HF-W2000 Instruction Manual

5.8.3 External interface cable length specifications

(1) External interface cable length specifications
The recommended maximum cable length for each interface of this equipment is as
follows.
No. Connector name
1 DVI-I port
2 DVI-D port
3 DisplayPort
4 LAN port
5 External control I/O port (Optional)
6 Serial port (COM1)
7 Serial port (COM2) (Optional)
8 Front USB2.0/1.1 (2 ports)
9 Front USB3.0/2.0/1.1 (2 ports)
10 Rear USB3.0/2.0/1.1 (4 ports)
11 Audio (LINE IN/LINE OUT)
A connected device may not work properly depending on the device. Check proper
operation of the device before you use it.
Cable length (m)
3
3
3
UTP Category 5e or better
100
For information about the cable
30
specifications, see "5.8.2 (3)".
Use a shielded cable.
15
Use a USB 2.0 compliant shielded cable.
If you use an extension cable, connected
USB devices may not work properly.
3
Depending on a device to connect, use a
2
USB 3.0 compliant shielded cable or a
USB 2.0 compliant shielded cable.
If you use an extension cable, connected
2
USB devices may not work properly.
2
5-27
5. SPECIFICATION
Remarks