Hitachi HF-W2000 Instruction Manual page 96

2. OPERATION
< NOTE >
・ Do not change the Rotation and Scaling settings.
・ When you configure the resolution, color depth, and refresh rate, you must
choose from the options described in "4.1 Equipment Specification
(7) Supported resolutions".
4. When you finish configuring the setting items, click Apply. If you change the
resolution or refresh rate, the following confirmation screen for the configuration
change will be displayed. Click Yes.
< NOTE >
・ The resolution options may include resolutions larger than the resolutions
supported by the connected display.
・ If you select a resolution larger than the maximum resolution supported by the
display, the display will black out.
・ After the driver is installed, the resolution is automatically set to the maximum
resolution supported by the connected display. When you change the
resolution, select a resolution smaller than that.
2-24