Hitachi HF-W2000 Instruction Manual page 112

3. SETUP
3.2.1.3 Setting Up display language
The MUI-version Windows® 10 IoT Enterprise can display the language specified from
Control Panel by installing an additional language.
[Notice]
• The recovery DVD is required to install an additional language. Before starting this work,
prepare the recovery DVD supplied with this equipment.
(1) Installing additional language
Perform the following procedure to install an additional language.
1. After the OS has started, set the last disc (the second one of a set of two discs or the
third one of a set of three discs) of the recovery DVD "HITACHI HJ-204*-WEM*
Product Recovery DVD" to the DVD drive. (The underlined part is an example. The
information of * varies from model to model because the model of the purchased
computer is indicated. Replace the model described in the subsequent procedure with
the model of the purchased equipment.)
2. Execute the following command from the Command Prompt as administrator.
dism /online /Add-package /Packagepath:d:language¥zh-cn¥lp.cab
Notes 1: Specify the DVD drive letter for d: (assuming [D] in the command example).
2: Specify the culture name corresponding to the language you want to add for zh-
cn. Correspondence between language and culture name is shown below.
3. After the installation has been completed, restart the system.
Language Culture name
Chinese (China) zh-CN
Korean ko-Kr
Portuguese Pt-PT
Thai th-th
3-10