Hitachi HF-W2000 Instruction Manual page 240

[RAID condition] section：
・
Shows the RAID status. The following table shows the list of items in this subsection
and their respective descriptions. This subsection is available in the B model.
Output item
Arrayxx
Status: yy(zz ww, Media
Error)
RAID level: vv
・ [Drive condition] section:
Shows the status of a drive. The following table shows the list of items in this
subsection and their respective descriptions.
Display item
Drive bayxx
Status: yy
Used hours: zz
xx
yy
zz
ww
Media
Error
vv
xx Shows the drive bay number.
yy Shows the status of the drive.
Healthy: Normal
Not Connected: No disks are mounted.
Smart Detected: SMART is detected.
Offline: Offline (B model only)
Rebuild: Rebuilding (B model only)
Incomplete data: Data mismatching (B model only)
Overrun: Power-on (=used) hours exceeded the threshold.
Unknown: Unknown status
Smart Detected, Overrun: SMART is detected and the
zz Shows the drive power-on (used) hours.
8. MAINTENANCE OPERATIONS
Description
Shows the number of the RAID array.
Shows the RAID status
Optimal：Normal status
Degrade：Abnormal status
Unknown：Unknown status
Fail：Failing status
Task in progress in the representation
below. Shown only when the task has
started.
Rebuild：Rebuilding
Completion rate of task in progress.
Shown only when the task has started.
Shown only when a media error is
detected during the task.
RAID level in the representation below.
1：RAID1
Description
power-on hours exceeded the
threshold.
8-23