Figure 6-4 Removing An Extension Board - Hitachi HF-W2000 Instruction Manual

6. CHECKUP AND MAINTENANCE
[3] Remove the screw which fixes an extension board to the extension slot.
[4] Pull up an extension board for the connector of the extension slot horizontally while
having a part right above the connector terminal of an extension board.
The connector of
the extension slot
[5] Fix a slot cover to the extension slot which became empty with a screw.
[6] Attach a PCI cover in the procedure that is reverse to procedure step 2.
[7] Attach the cover of the equipment.
Always attach a slot cover to each unused extension slot. Otherwise, failure of
the equipment may result.

Figure 6-4 Removing an extension board

NOTICE
6-10
Extension board
[3] The screw
[4]