Hitachi HF-W2000 Instruction Manual page 216

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
12. When the restoration process back to the factory-shipped condition performed by the
recovery DVD is fully completed, "Recovery Complete." is displayed in the [Status]
box, and the recovery DVD is automatically ejected. Remove the recovery DVD from
the DVD drive, and then click Exit. The computer will be shut down.
The system drive of the HF-W2000 Model 48/45 is now successfully restored to the
factory condition by using a recovery DVD. After you finish the procedure above,
follow the instruction in "CHAPTER 3 SETUP" to set up the OS.
7-12