Hitachi HF-W2000 Instruction Manual page 213

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
6. When you enter the partition size in the Input the partition size window and click Next
in the A model or B model, the confirmation window for the settings of the drive
restoration is displayed. When you click Next in the selection window for the drive
restore option in the S model, the confirmation window for the settings of the drive
restoration is displayed.
・If you are OK with the displayed partition size to be restored, click Yes. Proceed to
step 8.
・If you are not OK with the displayed partition size to be restored, click No.
The selection window for the drive restore option returns.
<When you select Only the system and boot partition in the selection window for the drive
restore option >
7. If you select Only the system and boot partition in the selection window for the drive
restore option, the confirmation window for the settings of the drive restoration is
displayed.
・If you are OK with restoring only the boot partition, click Yes. Proceed to step 8.
・If you are not OK with restoring only the boot partition, click No. The selection
window for the drive restore option returns.
7-9