10.6.8 List of error message
This section lists error messages displayed by the software RAID utility and the corrective
actions for each item.
Table 10-3 Error Messages from the Software RAID utility
No
Error Message
1
Unreadable sector was
detected on the
Master.(Media error)
(Mirrored)
2
Media error was occurred
on RAID.
3
Unwritable sector was
detected on the
Master.Operation aborted.
(Mirrored)
4
The capacity of drive is
not equal.
Operation failed.
5
(EC=0xXXXXYYYYZZZ
ZZZZZ)
Operation failed.
6
(EC=0xXXXXYYYYZZZ
ZZZZZ)
Click OK button to shut
down.
Meaning
An unreadable sector was
detected on the Master (or
Mirrored). This is a media error.
An unreadable sector was
detected in both drives during the
consistency check. This is a
media error.
An unwritable sector was
detected on the Master (or
Mirrored). Operation was
aborted.
The capacity of the mounted
drive is different.
An internal error occurred.
XXXX: Error module
YYYY: Error processing
ZZZZZZZZ: Detailed error code
An internal error occurred.
(Before a dialog box appears)
XXXX: Error module
YYYY: Error processing
ZZZZZZZZ: Detailed error code
10-43
10. SOFTWARE RAID1
Remedial action
When the sector in which a read error was
detected is read, the system may not operate
correctly because the information of the sector
is not rebuilt.
Back up data and replace the error drive, and
then rebuild the RAID.
After the RAID has been rebuilt, restore the
backup data.
Back up data and replace one drive, and then
rebuild the RAID. After that, also replace the
other drive and rebuild the RAID, and then
restore the backup data.
Replace the error drive and rebuild the RAID.
Mount a drive with the same capacity.
Contact the sales staff of Hitachi.