Table 1-3 Power Cord And Plug Identification - Hitachi HF-W2000 Instruction Manual

Input rating Plug configuration
100V - 120V
North America
125V
North America
200V - 240V
North America
Universal Euro
UK
Australia
220V – 250V
中华人民共和国
< NOTE >
• As an option, this equipment offers a cable clamp to be used for attaching the
power cord to the equipment. Use that cable clamp as required.

Table 1-3 Power Cord and Plug Identification

Reference
standards
1 ANSI C73.11
2 NEMA 5-15P
3 IEC 83
1 ANSI C73.11
2 NEMA 5-15P
3 IEC C13
1 ANSI C73.11
2 NEMA 6-15P
3 IEC 83
4 CEE (7)
II, IV, VII
3 IEC 83
5 BS 1365
3 IEC 83
6 AS C112
7 GB/T 5023.5
GB 1002,
GB 2099.1
GB 17465.1
GB 15934
Cord and connector
a b
a=7±0.05 mm
b=7±0.05 mm
c=15.8 mm
23 mm
1-21
1. GETTING STARTED
c
Three-wire power cord
with a two-pole three-
terminal grounding-type
connector.
电源线请务必使用带
接地相的3相插头。