Memory Dump Confirmation Messages - Hitachi HF-W2000 Instruction Manual

8. MAINTENANCE OPERATIONS

8.2.1 Memory Dump Confirmation Messages

If the capacity of the physical memory exceeds the capacity of the memory dump file or the
virtual memory due to, for example, newly added physical memory, or if a complete memory
dump cannot be collected because the memory dump setting has changed, this equipment
displays the following message and records an event in the event log.
If you want to use the system with the memory dump setting recommended for this
equipment, click Yes to close the message box. The memory dump and virtual memory
settings are updated and the area for saving a memory dump is allocated automatically as
required.
< NOTE >
・If you do not want to use the system with the memory dump setting
recommended for this equipment, click No to close the message box. Then, this
message box will no longer be displayed.
・ When the message box above is displayed, sometimes an information log entry
with Event ID 26 is recorded in the event log.
If the following message is displayed afterward to prompt you to restart the system, click
OK to close the message box, and then restart the system.
8-8