Table 8-6 Error Messages Of The Createdmp Command - Hitachi HF-W2000 Instruction Manual

8. MAINTENANCE OPERATIONS
<Diagnosis>
When this command finishes normally, the command exits without output in the command
prompt window. When this command is terminated with an error, the following error
message is displayed.
Error: In the current settings, memory dump file
won't be saved.
Error: Free disk space is too low.
Error: Systemcall failed. (%s, %x)
%s: Name of the Windows API function where the
error occurred
%x: Error code from the Windows API
You do not have the privilege to run this command.
Please run this command again on "Administrator:
Command Prompt".

Table 8-6 Error Messages of the createdmp Command

Error message
A memory dump cannot be collected
with the current setting. In the
memory dump settings, select a
"Complete memory dump" option.
The free space on the disk is too low.
Increase the free space on the disk and
retry.
An internal error has occurred.
You do not have administrator
privileges.
Log on to the computer by using an
administrator account and run the
command again. If User Account
Control (UAC) is enabled, start the
command prompt with administrator
privileges and run the command.
8-18
Meaning