External Interface Cable Length Specifications; Table 5-22 External Interface Cable Length Specifications - Hitachi HF-W7500 65 Instruction Manual

Industrial computer
Hide thumbs Also See for HF-W7500 65:
Table of Contents

Advertisement

5.9.3 External interface cable length specifications

The recommended maximum cable length for each interface of this equipment is as follows.

Table 5-22 External interface cable length specifications

No.
Connector name
1
DVI-D port
2
DisplayPort
3
LAN port
4
External control I/O port (Optional)
5
Serial port (COM1)
6
Serial port (COM2) (Optional)
7
Front USB2.0/1.1 (2 ports)
8
Rear USB3.0/2.0/1.1 (6 ports)
9
Audio (LINE IN/LINE OUT)
(*1) The cables of the mouse and keyboard defined as options are one meter or longer. However,
this is not a problem, because their operation has been checked.
< NOTE >
If you use cables longer than the recommended maximum cable length or if
you use an extension cable, it may not operate properly.
A connected device or a conversion connector may not work properly
depending on them. Check proper operation of them before you use it.
Cable length (m)
3
3
UTP Category 5e or better
100
For information about the cable
30
specifications, see "5.9.2 (3)".
Use a shielded cable.
15
Use a USB 2.0 compliant shielded cable.
1(*1)
Depending on a device to connect, use a
USB 3.0 compliant shielded cable or a
USB 2.0 compliant shielded cable.
2
2
5-27
5. SPECIFICATION
Remarks

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hf-w7500 60

Table of Contents