Rtd Channels - Moxa Technologies ioLogik E1200 Series User Manual

ioLogik E1200 Series
Enabling the Point-Slope Formula function on the Auto Scaling Settings page will linearly convert the
actual current or voltage value into other user-defined units, such as percentage or ppm (parts per million).
NOTE The scaled value's Modbus address differs from the original value.
The AO channel's Alias Name can also be configured on this page.

RTD Channels

The current status of each RTD (Resistance Temperature Detector) channel can be viewed on the RTD
Channel page.
Click on a specific channel to access the RTD channel settings.
Select the Enable RTD Channel checkbox and then select the sensor type from the dropdown menu that
meets the physical attachment to the ioLogik E1200.
3-15
Using the Web Console