Moxa Technologies ioLogik E1200 Series User Manual page 53

Industrial ethernet remote i/o with 2-port ethernet switch

Hide thumbs Also See for ioLogik E1200 Series:

Table of Contents

ioLogik E1200 Series

SNMP Trap

Enable Channel SNMP Trap by clicking on the SNMP Trap box, and then select the channel you would like to

enable.

NOTE

SNMP is not supported while using the peer-to-peer function.

Specific ID

The Specific ID (trap number) can be any number between 1 and 20. (You may need to consult with your

network administrator to determine how the trap numbers are used and defined on the network.)

Digital Input / Counter Trap Settings

For a digital input, the trap is triggered by the On Change function. When there is a change in the DI channel,

the SNMP will send a trap to the SNMP Server.

NOTE

SNMP Trap does not support the counter trap function.

Digital Output / Pulse Output Trap Settings

For digital output, the trap is triggered by the On Change function. When there is a change in the DO channel,

the SNMP will send a trap to the SNMP Server.

NOTE

SNMP Trap does not support the Pulse Output trap function.

3-24

Using the Web Console

Table of Contents