Iologik E1212 - Moxa Technologies ioLogik E1200 Series User Manual
Industrial ethernet remote i/o with 2-port ethernet switch
Hide thumbs
Also See for ioLogik E1200 Series:
- User manual (69 pages) ,
- Quick installation manual (9 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
ioLogik E1200 Series
ioLogik E1212
Inputs and Outputs
Digital Inputs: 8 channels
Configurable DIOs: 8 channels
Isolation: 3K VDC or 2K Vrms
Digital Input
Sensor Type: Wet Contact (NPN or PNP), Dry Contact
I/O Mode: DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact (DI to COM):
• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type: 8 points per COM
Counter Frequency: 250 Hz, power off storage
Digital Filtering Time Interval: Software selectable
Digital Output
Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 500 Hz
Over-voltage Protection: 45 VDC
Over-current Protection: 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown: 175°C (typical), 150°C (min.)
Current Rating: 200 mA per channel
Power Requirements
Power Consumption: 155 mA @ 24 VDC
MTBF
(mean time between failures)
Time: 561,930 hrs
Database: Telcordia (Bellcore)
1-6
Introduction
Advertisement
Table of Contents
