Moxa Technologies ioLogik E1200 Series User Manual page 26

Industrial ethernet remote i/o with 2-port ethernet switch

Hide thumbs Also See for ioLogik E1200 Series:

Table of Contents

ioLogik E1200 Series

DIO Mode Configuration Settings

DIO mode configuration settings are shown below:

The default setting is DO Mode.

AI Mode Configuration Settings

Analog mode configuration settings are shown below:

The default setting is Voltage Mode.

EXT Power Configuration Settings (ioLogik E1213 Only)

The ioLogik E1213 digital outputs have 3 possible external (EXT) power configurations. Only one field power

configuration can be selected at a time (JP10 / 12V JP5 / 9V JP11) and the jumper must be inserted vertically,

not horizontally. EXT power configuration settings are shown below:

The default setting is Field Power JP10.

NOTE

The ioLogik E1213 has 4 pure DO channels and 4 hybrid DIO channels. For the 4 pure DO channels, you can use

the jumpers to select the power configuration output (i.e., field power, 12 V, 9 V). But for the 4 hybrid DIO

channels, you cannot use the jumpers to select the power configuration output. Instead, you can only use the

jumpers to set the DIO channels to either DI mode or DO mode.

2-4

Initial Setup

Table of Contents