C-COM Satellite Systems Inc.
92
HNS_Ku Modem Options:
The Hughes modems will have additional configurable fields such as frequency, symbol rate, polarization,
etc... that are required on the modem side in order to find satellite. These settings must match the
controller side configuration in order for the modem to successfully lock and stay connected on satellite
after TX is enabled.
Freq (KHz) and Symb (s)
These two fields represent the required Frequency and Symbol Rate of the VSAT modem. This is usually
applied to Hughes Net services only. Other services do not require the modem frequency to find
satellite.
Rx-Pol
Receive Polarization set in the satellite modem, Hughes Net service only.
Tx-Pol
Transmit Polarization set in the satellite modem, Hughes Net service only.
Longitude
Orbital slot / Longitude of the desired Satellite
iNetVu™ 7710 Controller User Manual