C-COM Satellite iNetVu 7710 User Manual page 89

C-COM Satellite Systems Inc.
TR No. (Transponder Number)
There are Six (6) Transponder values in the 7710 Controller for each satellite.
Transponder (0-2) are horizontal receive
Transponder (3-5) are vertical receive.
The user may override the default values saved in the controller with his/her transponder information
(frequency, symbol rate, FEC rate)
DVB Type
This drop down menu allows for the configuration of the DVB carrier to search for. There are currently
two options DVB-S1 and DVB-S2 ACM.
Frequency (KHz), Symbol Rate (sps) FEC Rate,
The frequencies listed are in Ku-band.
The user may select from the six (6) available transponders saved in the 7710 Controller, which are
specific to each satellite, or he/she may also enter valid transponder data manually.
DVB will base satellite acquisition on three satellite transponder parameters, them being:
Symbol Rate (sps)
Symbol Rate of receive signal
FEC (Code) Rate
FEC Rate of receive signal
Rx
Transponder polarity, this field will auto populate as a direct result of transponder no. selected. H for
Horizontal and V for Vertical.
Read Transponder
Retrieves Transponder information like DVB type, DVB frequency for the selected transponder of the
Longitude. You will get different information when transponder No is changed and you click Read
Transponder button.
iNetVu™ 7710 Controller User Manual
89