C-COM Satellite iNetVu 7710 User Manual page 73

C-COM Satellite Systems Inc.
System Status
Displays current system environment

System Idle
No operations are currently being performed.

ACP Testing
ACP Testing is being performed.

Skew Adjusting
Polarization adjustment to adjust the polarization axis for any vehicle inclination. The
Azimuth Axis will rotate 90º on both sides of the peaked azimuth angle, then return to
the satellite position, and adjust the polarization axes to compensate for any recognized
mount inclination.

Manual Operation
Manually controlled movement via Controls menu has been detected.

Mount Testing
System test or demo being performed via System Test and Demo menu.

Peaking on Satellite
System makes minor adjustments in positioning in order to receive optimal Signal
Strength.

CP Calibration
Compass Calibration is being performed.

Positioning
An automatic movement command has been initiated (i.e. Find Satellite or Deploy
Antenna) and the antenna is moving into the designated position.

Searching Satellite
Antenna is performing a search pattern to locate the satellite.

Stowing Antenna
Antenna is being stowed.

Unknown Status
Satellite Modem Communication Status
Indicates the Transmitter status and displays any issues in communication with the Satellite
Modem

Modem TX Enabled
Indicates that the transmitter has been enabled.

Operation Mode
Indicates that the TRIA has been enabled on SurfBeam2.

Modem TX Disabled
Indicates that the transmitter has not been enabled.

No Modem Communication
The controller is trying to establish communication with the modem and or
No power is applied to the modem.
GPS Status
Displays condition of the GPS signal

GPS Normal
GPS signal is being received from the GPS Antenna.
iNetVu™ 7710 Controller User Manual
73