Dply_C - C-COM Satellite iNetVu 7710 User Manual

C-COM Satellite Systems Inc.
4 – Deploy
Automatically moves antenna to the manually entered Elevation, Azimuth and Polarization
angles.
7.11.3.

DPLY_C

1
3
1 – Elevation Movement
User-defined target elevation angle offset for compass reading
2 – Polarization Movement
User-defined target polarization angle for compass reading
3 – Azimuth Movement
User-defined target azimuth angle for compass reading
4 – Check Compass at specified target point.
Tests the compass' heading and accuracy at the user defined Elevation, Polarization, and Azimuth
angles, by rotating the antenna at 90 intervals and comparing the compass readings with the
actual antenna's movement. This function is mainly used for testing purposes. Ensure proper
orientation (front of vehicle is point north). Popup (see below) displayed in Software application.
Antenna will move to the target Elevation, Polarization, and Azimuth for reading the compass
heading such that the user can determine if the compass reading is accurate at that point.
5 – Manual Compass Calibration
Will allow user to deploy and calibrate the compass manually at 3 points (0, 90 and 180), all three
angles must be calibrated for the Manual Calibration process to successfully calibrate the
compass.
E: +20 P+60
A +180 CP_T
Fig. 46: Deploy Compass Reading Angles
iNetVu™ 7710 Controller User Manual
2
5
CPM
4
57