Hughes Modem Status (Only) - C-COM Satellite iNetVu 7710 User Manual

C-COM Satellite Systems Inc.
7.7.10.

Hughes Modem Status (Only)

1
1 – Modem Communication Status, controller communication with the modem,
INIT will appear if still initializing or no communication
NA will appear if no modem selected.
SQ will appear with modem signal value after modem communication is establish
(Modem TX Disabled).
2 – Displays the status of the (TX) satellite receiver transmit state.
3 – Displays the status of the (RX) Satellite receiver receive state.
4 – ACP status enables or disables the ACP routine after locking on signal.
D - Disables the ACP after locking on signal
E - Enables the ACP after locking on signal in which an isolation value is displayed after
successfully passing the 2 tests.
A_ST ACP has started
A_SP ACP has passed
5 – Beacon Receiver Frequency and Signal Strength
The Beacon Receiver is an optional unit that could be used to acquire satellite with the 7710 Controller.
See "iNetVu User Manual – Beacon Receiver" for details
2
SQ : 15 TC :24 RC :6
BR :1448.05 0/0dB
Fig. 24: Hughes Modem and Beacon Receiver
iNetVu™ 7710 Controller User Manual
3
A :D
4
5
36