C-COM Satellite iNetVu 7710 User Manual page 49

C-COM Satellite Systems Inc.
1 – GPS Status Configuration
N Use Coordinates from GPS Antenna
O Override GPS and use the coordinates entered (2) and (3). Enables the GPS coordinates
to be manually overridden. This should only be enabled in the event that the GPS
Antenna is malfunctioning and the user has a reliable, alternate source for coordinates.
Note 1: If you have overridden the GPS coordinates, they will have to be updated if the
Mobile Platform has moved to a new location since the overridden values will no longer
be accurate.
Note 2: Overriding the GPS will affect movement protection on all mobile platforms
preventing them from automatically stowing if vehicle movement and/or severe motion
are detected. If the vehicle drives off with the platform deployed, it will not stow as it
should because the GPS is overridden. Moving vehicle GPS speed and location must
reach min 5km/h and or Elevation angle changes by 2 or more degrees in order for the
movement protection feature to trigger!
2 – GPS Latitude Coordinate
3 – GPS Longitude Coordinate
7.10.7.
MT
1
2
1- Platform Type
The user is capable of configuring the platform type using iNetVu LCD panel.
A0756A - iNetVu
A0986A - iNetVu
A0986B - iNetVu
A0986C - iNetVu
A1201A - iNetVu
A1206A - iNetVu
A1206C - iNetVu
A1801A - iNetVu
A1810A - iNetVu
Indicates a situation or practice that might result in
property or equipment damage.
A0756A—2.X--3103
Fig. 37: Platform Information
® Fly-75V New Fly-Away 75cm (Ka - Band Circular)
Fly-98G/H/V, 2 Axis New Fly-Away 98cm (Ka - Band Circular)
®
® Fly-98G/H/V, 3 Axis New Fly-Away 98cm (Ka - Band Circular)
Fly-981, 3 Axis New Gen Fly-Away 98cm (Ku – Band, XPOL)
®
® 1201J, New Gen Drive-Away, 1.2m Ku Band
® Fly-1202 Ka, New Fly-Away 1.2m, Ka Band Viasat Tria
® Fly-1202 Ku, New Fly-Away 1.2m, Ku Band
® 1801, New Gen Drive-Away, 1.8m Ku - Band
® Fly-1801, 3 Axis New Fly-Away 1.8m Ku - Band
iNetVu™ 7710 Controller User Manual
3
49