C-COM Satellite Systems Inc.
Enable/Disable Transmitter
Automatically Enables or Disables the Transmission process. Background will turn grey
when transmitter is disabled and green when the transmitter is enabled.
Enable/Disable ACP
Enables or Disables the ACP (Automatic Cross-Pol Testing), and Manual Cross-Pol
Testing. Drop down will only be accessible with Hughes Ku service.
To Enable ACP, select "AUTO" or "MANUAL" from the ACP drop down list and click on
the 'Enable/Disable ACP' Button to initiate.
To Stop ACP testing, select "STOP" from the ACP drop down list, and click on the
Enable/Disable ACP Button to initiate.
Deploy Antenna
Automatically moves antenna to the manually entered Elevation, Azimuth and
Polarization angles.
Quick Deploy
Automatically moves antenna to the manually entered Elevation, Azimuth
and Polarization angles without first moving to 30˚ on Elevation. This process moves
to the set angles without the extra angle tuning that occurs with the Deploy Antenna
button.
Fig. 62:
ACP Option Selection
Fig. 63:
Deploy Antenna Input Values
iNetVu™ 7710 Controller User Manual
Range
-90 to +90
-180 to +180
-90 to +90
68