Test - C-COM Satellite iNetVu 7710 User Manual

C-COM Satellite Systems Inc.
NA – Sub-ID
Choose Typical for normal operation or select one of the custom created files when using multiple beacon
satellite search. User must depress Restore Defaults button to use the selected option and allow features of
that selection to propagate to the beam configuration section. This is extremely important when using the
custom files.
2 – Modem Communication Interface
COM - Console Port Interface
TCP – TCP Interface
HTTP - HTTP Interface
3 – Modem Delay Time
This allows users to delay Controller communication to allow slower modems to catch up. The
default setting is 0 – 1s user has option for a 10s delay.
4 – ACP
Allows automatic cross pol to be performed. This is available for Hughes Ku service only.
D – Disable Automatic cross-pol
E – Enable Automatic cross-pol
5 – Automatic TX Disable
The controller will automatically disable the transmitter if a reset is done to the modem or controller during
transmission and communication between the controller and modem is re-established. The action on the
TX disable occurs only after the communication between modem and controlled is restored.
Y – (Yes) Disable TX when power is restored after modem is reset.
N – (No) Do not disable TX after modem is reset and power is restored.
7.11.

TEST

 Orbital Slot of Satellite
 Receive Polarization
 DVB Type
 L-Band or Ku-Band Rx Frequency (kHz)
 Symbol Rate (ksps)
 FEC Code Rate
E&A&P DPLY
CP A_ACP M_ACP
Fig. 43: Test Menu
iNetVu™ 7710 Controller User Manual
DPLY_C
S_ACP
54