Table of Contents
Advertisement
C-COM Satellite Systems Inc.
6. Installation
®
The iNetVu
7710 Controllers are shipped pre-configured and calibrated with the iNetVu
Mobile Platform (equipped with the 7720 Remote Drive Module) and service which you plan to
use. Only configuration of the Satellite Modem / VSAT Communication parameters and the
satellite you wish to find is required.
6.1.
Rack Installation
The iNetVu
®
7710 Controllers include attachable "ears" which make the iNetVu
Controllers configurable for rack-mounted installation.
If you are installing the iNetVu
or a shelf to support the weight of the iNetVu
"ears/brackets" to fasten the unit to the rack face.
6.2.
iNetVu
®
Software – Software and USB Driver Installation
It is recommended that the previous software be uninstalled before installing latest software
version if upgrading. See minimum recommended pc requirements for most favorable working
system.
Note: Do not connect USB cable between controller and computer/laptop until the
software with all the required drivers have been successfully installed. This will ensure
the proper drivers are used once the USB connection is established.
Warning!! Please make sure you have administrative rights (privileges) on the computer
before you continue the installation. The setup wizard will display a warning to Contact
your system administrator for additional info.
1. If you are installing from the USB flash drive or have downloaded from the C-COM FTP,
run the iNetVu7710Setup.exe file.
®
7710 Controller onto a rack, ensure that you use supporting rails
®
7710 Controller, and use the provided
iNetVu™ 7710 Controller User Manual
16
®
®
7710
Hide quick links:
Advertisement
Table of Contents
