C-COM Satellite iNetVu 7710 User Manual page 35

C-COM Satellite Systems Inc.
3 - Transponder Number (for reference satellite)
(There are usually six (6) transponders for each satellite stored into the controller memory) 0 – 2
are horizontal Receive, and 3-5 are vertical receive. The user may overwrite the transponder
data.
4 – Reference Satellite DVB Transponder Frequency (MHz)
5 – Reference Satellite Transponder Symbol Rate (Ksps)
6 – Reference Satellite Transponder Code Rate. (DVBS1 or DVBS2A requirement)
DB-1 = 1/2
DB-2 = 2/3
DB-3 = 3/4
DB-5 = 5/6
DB-7 = 7/8
AUTO
7 – Power Supplied to LNB from the Controller for the Reference Satellite
7.7.9.
MD
This menu displays the modem status, beacon frequency and signal strength.
1
1 – Modem Communication Status, if the controller is still initializing communication with the
modem,
SQ - will appear after modem communication is establish (Modem TX Disabled)
INIT - will appear if no modem communication.
NA - will appear if no modem selected.
2 – Beacon Receiver Frequency and Signal Strength
The Beacon Receiver is an optional unit that could be used to acquire satellite with the 7710 Controller.
See "iNetVu User Manual – Beacon Receiver" for details
SQ : 0
BR :1448.05 0/0dB
Fig. 23: Modem and Beacon Receiver
iNetVu™ 7710 Controller User Manual
2
35