Sat - C-COM Satellite iNetVu 7710 User Manual

C-COM Satellite Systems Inc.
7.9.1.

SAT

4
1 – Target Satellite Beam ID
2 – Target longitude and Hemisphere
3 – Transponder number Horizontal Receive (0-2), Vertical Receive (3-5)
4 – Reference Satellite
D – The user should select "D" to disable this option.
E – If the user wishes to use the reference satellite, "E" should be selected.
5 – Inclined Operation
Enabling this option will allow the system to maintain signal with an inclined orbital satellite. The
user may select the time difference between each re-peak on the inclined orbital satellite without
disabling the transmitter and maximizing on the signal strength. If signal strength drops before the
re-peaking time is due, the system will automatically re-peak to maintain signal strength. Feature
enhanced and will be used with regular Ku/Ka services to maintain strong signal when platform
shifts or swings in position. This option will not work properly if Motion Protection is enabled at the
same time, disable Motion Protection when inclined option is enabled.
DIS: Disabled
1: Re-peak every 10 minutes
2: Re-peak every 30 minutes
3: Re-peak every 1 hours
4: Re-peak every 2 hours
5: Re-peak every 3 hours
6: Re-peak every 4 hours
7: Re-peak every 6 hours
8: Re-peak every 8 hours
9: Re-peak every 12 hours
6 – Reference Satellite Beam ID
The reference satellite is another search option that could be utilized by the user. The controller
will lock onto the Reference satellite DVB carrier, and will pivot to the target satellite position to
peak on the modem signal. Users acquiring Satellite using RF Search or direct DVB search with
the Target satellite DO NOT require this option.
3
2
1
05 009.0E - 0
REF:D BM01_072W
Fig. 29: Beam and orbital Configuration
iNetVu™ 7710 Controller User Manual
5
INC:D
6
41