C-COM Satellite iNetVu 7710 User Manual page 74

C-COM Satellite Systems Inc.

GPS Failed
GPS signal is not being received from the GPS Antenna.

GPS Override
GPS coordinates have been manually overridden from the Maintenance menu.
Controller Status
Displays communication status between the PC and the iNetVu

Controller Normal
Indicates normal communication status between the Controller and the PC

Controller Failed
A failure in communication between the Controller and the PC has been detected.
Motor Status
Displays the movement of the 3-axis motors: Elevation, Azimuth, and Polarization

EL Moving UP / DN
Elevation Motor is moving in the respective direction
(UP = Up, DN = Down)

AZ Moving Left / Right
Azimuth Motor is moving in the respective direction

Motor Unknown
Motor Status cannot be detected.
Antenna Status
Displays any relevant information regarding the Limit Switches, Potentiometers and/or
Inclinometers.

Antenna Normal
Limit Switches are ON/OFF in the correct relation to the Elevation, Azimuth and
Polarization Angles.

Sensor Error
This status is an indication of problem with cabling or hardware and/or controller setup.
Stop and troubleshoot before proceeding.

Antenna Unknown
Mobile Platform cannot be found. Ensure that the iNetVu
that all cables are connected should this indicator appear.
iNetVu™ 7710 Controller User Manual
® Controller
®
Controller is functioning and
74