Introduction - C-COM Satellite iNetVu 7710 User Manual

C-COM Satellite Systems Inc.

1. Introduction

®
The iNetVu 7710 Controller is a one-box, one-touch solution for satellite auto-acquisition.
Designed to interface with a number of Satellite Modems, iNetVu
S2ACM Receivers, the iNetVu
equipped with 7720 on-board module (Remote Controller). The 7710 will only work with the
remote on-board 7720 controller and the same holds true for the 7720. The iNetVu
Controller is easily configurable and operated antenna controller unit which comes with the
combined GPS/GLONASS Satellite Navigation System.
®
The iNetVu 7710 Controllers are fully functional and configurable straight out of the box solution.
No PC or monitor required. An I/O GLONASS/GPS Module inside the 7720 module and the
capability to connect an external GLONASS/GPS device via serial port, a DVB-S2ACM/CCM
Tuner, an onboard LCD displaying real-time system status, and a Keypad Navigator, makes it
easy to use the iNetVu
panel.
®
The iNetVu 7710 Controllers along with any iNetVu
alone unit. No modem or RF splitters are required for satellite acquisition. The LNB can be
powered straight from the controller.
The 7710 (central board) with the 7720 (remote drive module) Controllers complement the
iNetVu ® New Generation systems allowing movement on three axis simultaneously improving
satellite acquisition speed and accuracy.
® 7710 Controller connects to iNetVu
Fig. 1: iNetVu
Fig. 2: iNetVu
® 7710 Controller by simply configuring the controller right from the front
iNetVu™ 7710 Controller User Manual
® VSATs, and DVB-S/DVB-
® platforms which are
® 7710 Controller
7720 Controller
®
®
platform can work as a complete stand-
9
® 7710