C-COM Satellite Systems Inc.
84
8.2.3.
Maintenance Test (Demo Window)
®
Used for system tests, trouble-shooting, and for demonstrating the iNetVu
Mobile System. This
feature is accessible from the Maintenance Window Test button.
Start Angles
Initial values for the test/demo sequence.
End Angles
End values for the test/demo sequence.
Speed
Speed of the motor during the test/demo sequence (1 – lowest, 9 – highest).
Loop Interval
Enables an infinite loop of the test/demo sequence with time between test/demo sequences.
iNetVu™ 7710 Controller User Manual