Table of Contents
Advertisement
Options
The HP 85662A IF-Display Section has several options that may be ordered. Each option is
listed below with a brief description of the option and the changes to the IF-Display Section.
Three of these options (Option 067, Option H96, and Option 462) require substantial printed
circuit board changes and have separate sections in this manual. The PC board changes of
these options are documented either behind the tab for the assembly that changed or behind
the tab for the option that requires a PC board change. Parts lists for option assemblies are
located behind the tab of that option. Component locations and schematic diagrams for
option assemblies are incorporated onto the component location or schematic diagram of the
standard version where possible. However, many instances require that an option assembly
have its own component location or schematic diagram. These versions of the component
location or schematic diagram are located behind the tab for that option.
Option 067
HP 8567A Spectrum Analyzer
This option has a minimum resolution bandwidth of 1 kHz. Refer to the Hewlett-Packard
Test and Measurement Catalog for additional information regarding the HP 85678 Spectrum
Analyzer.
The following assemblies have changed for this option.
Option H96
HP 8568B Option E96 and HP 8568B Option E44 Spectrum Analyzer
This option does not have 10 Hz and 3 MHz Resolution Bandwidths.
The following assemblies have changed for this option.
Options 1
Advertisement
Table of Contents
