Remote User Authentication; Ftp With Removable Flash Devices; Http Server - Emerson QuickPanel IC755C S06RD Series User Manual

User Manual
GFK-2847Y
The FTP server is configured with the Quick Panel
enabled. Once enabled, a background program will run, waiting for clients to connect. Up
to ten connections are supported. Sessions that are idle for five minutes are terminated by
the server.
The server supports non-secure operation. All information including username, password,
and data is transmitted with no encryption and is susceptible to packet sniffing and various
FTP attacks.
Note:
3.6.1

Remote User Authentication

Note:
The server only supports anonymous login with password requested (but not validated).
This may prevent some types of attacks and is required by some clients. Once connected,
the remote user is logged into the FTP root directory.
3.6.2

FTP with Removable Flash Devices

All removable flash devices remote-FTP users as directories off the FTP root directory.
Computer Flash card partitions display as directories such as \SD Memory and USB Flash
Keys display as directories such as \Hard Disk. Full access privileges are granted for the client
in these folders/devices.
Removable flash device directories are captured when a session is opened and are not
changed while the session exists. If you start without an installed SD Card, close your session
and log on again to view the SD Card directory. If the SD Card existed when you logged on,
and is removed and inserted, it will still work, provided the SD Card's device name did not
change during reinsertion.
3.7

HTTP Server

The HyperText Transfer Protocol (HTTP) server included with the QuickPanel
standard (RFC 2616). The HTTP server is configured with the Quick Panel
default, the server is not enabled. Once enabled, a background program will run, waiting for
clients to connect. From the QuickPanel
in \Windows\www\wwwpub.
The server supports non-secure port 80 operation.
Note:
Software
If the server status is changed, the QuickPanel
The FTP root directory is available from the QuickPanel
device.
If the server status is changed, the QuickPanel
+ Setup Tool. By default, the server is not
+ must be restarted before changes take effect.
+ as \, and is the root of the flash
+ Operator Interface, the default web page is located
+ must be restarted before changes take effect.
Chapter 3
Aug 2020
+ supports
+
Setup Tool. By
19