GE VAT2000 Instruction Manual page 79

No. Parameter
D11 – Torque setting
0 Torque setting
1 Analog torque setting
2 Serial communication
torque setting
3 Operation panel torque
setting
4 ASR output
5 Torque setting (after
torque limiter function)
D12 – Slip
0 Slip
D20 – Extended monitor
0 Fault history reading entry
2 Non-default value
parameter list mode entry
D21 – Maintenance monitor
0 Cumulative Power On
time
1 Cumulative run time
2 CPU version
3 ROM version
D22 – Automatic tuning
0 Automatic tuning
progression display
D30 – Hardware monitor
0 Inverter type
1 Option PCB
6. Control Functions and Parameter Settings
Monitor parameters list
Unit
% The currently selected torque setting is displayed.
% The setting value from the analog torque input is displayed.
% The setting value from the serial communication torque input
setting is displayed.
% The torque set with the operation panel (B13-0) is displayed.
% The ASR output is displayed.
% The forward run direction torque is displayed with the (+)
polarity, and the reverse run direction torque with the (–)
polarity.
% The slip is displayed as a percentage in respect to the base
speed.
The last four fault history will display when SET is pressed.
The parameters that differ from the default factory settings are
displayed when key SET is pressed.
Hrs Displays the cumulative power ON time.
Hrs Displays the cumulative run time.
Display the CPU serial number.
Display the ROM serial number.
Displays the progression of the automatic tuning.
This indicates the inverter type
This indicates the mounted optional PCB.
The correspondence of the LED signals is shown below
S p ee d de te ctio n 3 (for P M)
S p ee d de te ctio n 1 a nd 2 (fo r IM )
A n alog inte rfa ce
Tra ce B ack In terface
P ro fibu s Interface
Option PCB monitor (D30-1)
6-4
Remarks
R e la y interface
P C in terface
S e ria l interface
Application
ST V/f VEC PM