GE VAT2000 Instruction Manual page 77

No. Parameter
D05 – Minor fault monitor
0 Minor fault
D06 – Pattern run monitor
0 Step number
1 Remaining time
D07 – Pump operation status monitor
0 Pump operation status
1 Next ON pump No.
2 Next OFF pump No.
3 Passage time
6. Control Functions and Parameter Settings
Monitor parameters list
Unit
The internal minor fault status will display.
The correspondence of each LED segment and signal is
shown in the next page.
Displays the current operation step number.
Hrs Displays the remaining time of current step.
Displays the ON/OFF status of the pumps
The correspondence of each LED segment and signal is
shown below.
"0" is displayed when all pumps are ON
"0" is displayed when all pumps are OFF
Hrs Displays the continuous ON /OFF time of the current pump.
It is cleared when the pump operation is changeover
P S O 4 (P um p 4)
P S O 5 (P um p 5)
Pump operation status monitor (D07-0)
6-2
Remarks
P S O 1 (P um p 1)
P S O 2 (P um p 2)
P S O 3 (P um p 3)
Application
ST V/f VEC PM