Control Source Switchover Method (J1 Setting); Control Source Switchover Method (J2 Setting); Various Setting Input Selection - GE VAT2000 Instruction Manual

C00-5

Control source switchover method (J1 setting)

J1 setting
Select whether to use the terminal block input signals with the local operation mode.
Refer to section 5-5 for details.
C00-6

Control source switchover method (J2 setting)

J2 setting
Select the auxiliary command input when the COP command is ON.
Refer to section 5-5 for details.
C02-0~8

Various setting input selection

Refer to section 5-9 for details.
Sequence input terminal function − 1
C03-0~7
Sequence input terminal function − 2
C04-0~9
Sequence input terminal function − 3
C05-0~9
Sequence input terminal function − 4
C06-0~8
Refer to section 5-3, 5-6 for details. Refer to the explanation for B06-0 to 6 (ratio interlock
bias increase /decrease function) for details on C03-7 and C05-3 to 4.
C07-0~9
Analog input terminal function
Refer to section 5-7 for details.
6. Control Functions and Parameter Settings
=1: OFF =2: ON
=1: OFF =2: ON
6-58