Table of Contents
Advertisement
Operating instructions TRAVELER 4all Ergo & 4you Ergo
To maintain the operating licence and the war-
ranty validity, the performance of the mainte-
nance tasks must be documented. Any faults
identified during maintenance work must be
rectified and documented as such before fur-
ther use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the mainte-
nance schedule.
33.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 41. The in-
spection lists are also available as pdf files
which can be filled in within the download area
of
www.proactiv-gmbh.com
"more documents
". In any event, keep all
>>
receipts / service reports as a means of proof,
and get any service work that has not been
carried out by the manufacturer documented.
Please bring these operating instructions /
service booklet to every service.
34 Disposal & Recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your dealer
in a proper, environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or disinfec-
tion of the product before the disposal).
In the following section, you will find a descrip-
tion of the materials for the disposal and recy-
cling of the product and its packaging:
Aluminium: frame, rims, castor forks, brakes,
back cross-bar, side sections, clothes guard,
anti-tipping protection, armrest frame, footrest,
footplate, push handles
under the link
Steel: fixing points, quick-release / screwed
axle, anti-tipping supports, brakes, screws,
nuts
Plastic: handles, quick-release levers, tube
plugs, caster wheels, armrest padding, tyres,
footrest, side sections, brake lever, anti-tipping
wheels, bags for packing
Synthetic fibres and foam: padding, covers
Cardboard / paper: packaging
35 Re-use
If your product has been provided to you by
your funding provider and you no longer re-
quire it, you should report this fact to your
health insurance company or your dealer. Your
product can then be simply and economically
re-used.
Before any re-use, a safety check must be
carried out on the product by PRO ACTIV. In
addition to the instructions contained in chapter
32 (Cleaning and care), a thorough cleaning of
all controls must be carried out before using it
again.
Before the product can be reused, it must be
prepared with care. A disinfection agent must
be sprayed onto all surfaces that the user may
make contact with. For this purpose, a liquid
disinfection agent based on alcohol must be
used for the quick residue-free disinfection
(e.g., Exporit 4712). Please observe the manu-
facturer's instructions for use for the disinfec-
tion agent that you use. In general, a complete
disinfection cannot be guaranteed on the
seams. We therefore recommend that you
dispose of the seat and rear padding.
This will be performed by PRO ACTIV as part
of the safety inspection. This safety-related
check must be initiated by the funding provider.
Moreover, in event of wear or due to adapta-
tion to the new user, components such as the
footrest, seat and back system can be adjusted
or replaced using the modular system. More-
over, as standard the backrest is also 7-fold
angle adjustable and can therefore be opti-
mally adapted.
56
Advertisement
Table of Contents
