Service Schedules; Proof Of Maintenance - PRO ACTIV LITTY 4you Operating Instructions Service Booklet

For tyres without thread: As soon as there
is one or more points where the tyre carcass or
the puncture-proofing is visible, the tyres must
be changed as otherwise there is an increased
risk of an accident.
Only manufacturer's original parts may be
used when ordering spare parts.
Repairs and conversions to the product
may only be carried out by your dealer or PRO
ACTIV.
Tightening torques and securing details for
fastening elements as shown in the table in
chapter 31 must be observed.

26.2 Service schedules

There is some maintenance work or checks
which should be carried out by the user
themselves at regular intervals (approximately
every 4 weeks depending on the frequency of
use):

Check the tyres for damage, foreign bodies
and any cracks that form.

Check the brakes (function, wear on pivot
bolts).

Check the tyre pressure and correct if
needed (the tyre pressure should always
be as printed on the tyre covers).

Check that the anti-tipping device is work-
ing.

Check that the fixing screws on the seat
and back system are in stable condition
and firmly seated.

Clean and oil all pivot points.
If you should discover any problems dur-
ing these checks, please immediately contact
your dealer or PRO ACTIV. Service and repair
work on the product may only be carried out by
your dealer or PRO ACTIV.
23
Operating instructions LITTY 4you
In addition to these maintenance tasks /
checks by the user, PRO ACTIV has pre-
scribed maintenance tasks to be carried out
by the dealer or PRO ACTIV for safe opera-
tion of the product and to minimise the risk to
the user or third-parties.
The initial inspection is performed six weeks
after delivery. The maintenance schedule can
be found in the inspection lists in chapter 34.
Subsequent inspections are then always per-
formed after another year after the last inspec-
tion. The maintenance schedule can be found
in the inspection lists in chapter 34.
After extreme stresses, such as during holi-
days where the product was exposed to sand,
sea water or snow, an additional deep clean
and inspection by your specialist retailer is
recommended.
To maintain the operating licence and the war-
ranty validity, the performance of the mainte-
nance tasks must be documented. Any faults
identified during maintenance work must be
rectified and documented as such before fur-
ther use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the mainte-
nance schedule.

26.3 Proof of maintenance

To provide proof of the maintenance, you can
use the inspection lists in chapter 34. The in-
spection lists are also available as pdf files
which can be filled in within the download area
of www.proactiv-gmbh.com. In any event, keep
all receipts / service reports as a means of
proof, and get any service work which has not
been carried out by the manufacturer docu-
mented. Please bring these operating in-
structions / service booklet to every ser-
vice.