Table of Contents
Advertisement
Operating instructions TRAVELER 4all Ergo & 4you Ergo
Figure 40: Step 4: Simple threading in of the belt
through the tensioning loops
The belts must always be threaded
through the tensioning loops twice, otherwise
the belts will slacken when using the product,
and with heavy loads, the middle web of the
tensioning loops will sag strongly.
Figure 41: Step 5: Returning the belt through the
tensioning loop to obtain the required "double pas-
sage"
Figure 42: Step 6: Pulling the belt through for the
double passage
Leave the loops
Figure 43: Step 7: Double passage
Figure 44: Step 8: Threading in the belt
Figure 45: Step 9: Threading in the belt
19.3 Ergonomic back shell & its setting
options
The back system "Ergonomic back shell" com-
prises an aluminium shell, Velcro cross-straps
and a back padding.
There is already a slack integrated in the back
shell due to the shape of the back shell. Noth-
ing can be adjusted here.
However, lumbar support can be achieved
using three Velcro cross-straps. For this pur-
pose, the back padding is removed over the
Velcro straps. Now the cross-straps can be
tensioned to the respective individual require-
ments by undoing and reapplying the Velcro
strap system.
22
Advertisement
Table of Contents
