Removing And Attaching The Headrest - PRO ACTIV TRAVELER 4all Ergo Operating Instructions Service Booklet

Table of Contents

Advertisement

To move the anti-tipping support into the
operating position, press the anti-tipping bar
downwards and swivel this to the rear. Make
sure that the anti-tipping support is engaged
correctly again. This is visible when the foot-
rest pins have engaged in the corresponding
recess of the anti-tipping supports from the one
side and the M6 fixing screws from the other
side.
An accompanying person can also press
the anti-tipping support downwards by stepping
on the footrest pins and then swivelling into the
operating position.
Press the anti-tipping
support downwards and
swivel to the rear
Figure 117: Moving anti-tippers into the operating
position
M6 fixing screw engaged in the re-
cess of the anti-tipping support
Figure 118: Anti-tipping support engaged correctly
To move the anti-tipping support into the
passive position, press the anti-tipping bar
downwards and swivel this to the inside under-
neath the seating area. Make sure that the
anti-tipping support is engaged correctly again.
41
Operating instructions TRAVELER 4all Ergo & 4you Ergo
Footrest pins
This is visible when the footrest pins have en-
gaged in the corresponding recess of the anti-
tipping supports from the one side and the M6
fixing screws from the other side.
Press the anti-tipping support down-
wards and swivel inwards underneath
the seating area
Figure 119: Moving anti-tippers into the passive
position
25.2 Removing and attaching the
headrest
Cord on the tension spring
Spring retention
cap
Footrest pin
Figure 120: Overview of terms
To remove the anti-tippers, the M5 fixing
screw (AF 3 mm) is screwed out of the spring
retention cap and at the same time, the cord
that is fixed to the tension spring is retained.
Now the cord can be released and the anti-
tipping bars can be removed from the anti-
tipping support downwards. The spring reten-
tion cap must also be removed. In order to
prevent loosing the M5 fixing screw, this is
screwed back into the spring retention cap.
M5 fixing
screw
Anti-tipping
supports

Advertisement

Table of Contents
loading

This manual is also suitable for:

Traveler4you ergo

Table of Contents