Push Handles; Back Tube With Integrated Handles; Aluminium Push Handles Fixed In Back Tube; Push Handles, Horizontally Screwed In Back Tube - PRO ACTIV TRAVELER 4all Ergo Operating Instructions Service Booklet

27 Push handles

27.1 Back tube with integrated handles

Figure 147: Back tube with integrated handles
With these push handles, there is no option for
adjustment and no possibility to remove the
handle.
27.2 Aluminium push handles fixed in
back tube
M6 fixing screw with washer
Figure 148: Aluminium push handles fixed in back
tube
It is not possible to adjust these push handles.
To remove the push handles, undo the M6
fixing screws (AF 4 mm) with washer on both
sides. Then the push handle can be removed
from the back tube.
49
Operating instructions TRAVELER 4all Ergo & 4you Ergo
To install the push handles, place these in the
back tube and insert the M6 fixing screws (AF
4 mm) (with washer) into the each of the holes
of the back tube and push handle. Tighten the
M6 fixing screws (AF 4 mm) to 7 Nm torque
and secure them with thread lock fluid.
27.3 Push handles, horizontally
Figure 149: Push handles, horizontally screwed in
back tube
It is not possible to adjust these push handles.
To remove the push handles, turn these
counter-clockwise out of the back tube.
Figure 150: Screw the push handle horizontally out
of the back tube
To install the push handle, turn it into the back
tube clockwise and tighten it to a maximum
hand tightness.
screwed in back tube
Turning out